Evaluation

Features a chest piece design for ease of use around blood pressure cuffs and body contours. Tunable diaphragm conveniently alters between low and high frequency sounds without the need to turn over the chest piece. Includes a single-tube design with rimmed non-chill diaphragm and...

Baseline Absolute+Axis Goniometer attachment is a removable attachment piece to be attached to any 12" plastic goniometer (sold separately). When attached to the end of one goniometer arm, the standard goniometer is transformed into an Absolute+Axis goniometer. The Absolute+Axis (AA) goniometer establishes a "true"...

Baseline Plastic Absolute+Axis Goniometer - 360 Degree Head - 12 inch Arms has an integrated Absolute+Axis at the end of one arm. The Absolute+Axis (AA) goniometer establishes a "true" vertical or horizontal to the start point of a measurement. Many goniometric measurements require one...

90 Memory Recall• Pressure Rating Indicator: gives you the ability to quickly interpret your readings by color codes. • Irregular Heartbeat Detection: alerts the user of the presence of an irregular heartbeat and enables the monitor to provide an accurate reading even if an...

These Aneroid Blood Pressure units come with a 300mm aneroid gauge, velcro cuff, inflation bulb & bladder, and air release valve. Packaged complete in a zippered leatherette carrying case.

The Baseline squeeze (bulb) dynamometer with 30 PSI gauge and max force indicator (reset) that remains at the maximum reading until reset is the inexpensive way to reliably measure hand and finger strength. Unit is calibrated in PSI (pounds-per-square inch).

The Baseline HiRes Gauge ER Dynamometer is the ideal device to measure grip and hand strength as well as evaluate patients with hand trauma or dysfunction. This dynamometer provides accurate grip strength readings without the subject being able to "feel" the handle move. Easy...

The Baseline LiTE Dynamometer is the ideal device to measure grip and hand strength as well as evaluate patients with hand trauma or dysfunction. This dynamometer provides accurate grip strength readings without the subject being able to "feel" the handle move. Easy to operate...

The Baseline Standard Dynamometer is the ideal device to measure grip and hand strength as well as evaluate patients with hand trauma or dysfunction. This dynamometer provides accurate grip strength readings without the subject being able to "feel" the handle move. Easy to operate...

Use HHD to MMT dual handle stabilizer to stabilize MMT dynamometer during test procedure. Hand dynamometer and MMT attachment accessories sold separately.

Baseline LiTE hydraulic pinch gauge has a 50 pound capacity. Unit has red body and 2-1/2" analog gauge. Unit has 1 year manufacturer's warranty. The pinch gauge uses a hydraulic system to assure convenience, product reliability and measurement accuracy and repeatability. Therapist can support...

Baseline mechanical pinch gauge is available in 2lbs, 10 lbs, 30lbs and 60lbs The pinch gauge allows for measure tip, key and palmer pinch strength in both pounds and kilograms. Measurements are accurate and repeatable. The Baseline pinch gauge is made in USA and...

Like the CROM, the BROM (Back-Range-Of-Motion) instrument combines inclinometers and magnets for accurate, objective ROM measurement that is standardized and consistently repeatable. The BROM is superior to ″stand alone″ inclinometers because it measures flexion and extension, rotation, lateral flexion and pelvic tilt without the...

The Baseline Bubble Inclinometer precisely measures, tests and evaluates the range-of-motion of necks, hips, spines, elbows, knees, shoulders, ankles, wrists and MCP joints. To use, place the Inclinometer near the joint to be measured. As the joint gets manipulated, the range-of-motion displays (in degrees)...

Chrome-plated handle with compartment to house stainless steel needle and brush. Two rubber percussion head sizes

Combines inclinometers and magnets to provide accurate measurement of cervical range of motion. Lightweight frame is easy to position and adjusts to fit patient′s head. Establishes standard references for future comparisons to evaluate the effectiveness of treatments.

The O′Connor Finger Dexterity Test requires hand placement of 3 pins per hole. This test has been used successfully as a predictor for rapid manipulation of small objects, as in assembly line work. It has also been found useful in predicting success for instrument...

This transparent plastic goniometer permits observation of a joint's axis of motion and its range of motion measurements of MCPs, PIPs and DIPS. The primary purpose of this device is to assist in physical therapy by determining range of motion of a finger joint...

Use the HHD to MMT handle to convert ANY hydraulic grip strength (hand) dynamometer to a MMT (Manual Muscle Test) dynamometer. MMT handle comes with 3 push pads: straight, curved and small circular. Use optional dual-grip handle to stabilize MMT dynamometer during test procedure...

Jamar hydraulic hand dynamometer offers accurate and repeatable grip strength readings. Unit has an adjustable 5-position handle. Maximum strength indicator remains after each reading until reset. Registers in pounds and kilograms.

Provide functional capacity evaluation of an individual's material handling activities. Each box features removable plate weight holders and hinged lids. Natural finish.

Baseline Measurement Tape, 60 inch Measurement tape is housed in protective plastic casing for easy opening and retracting. Woven fabric measurement tape is calibrated in inches and centimeters. Measurement tape has push button retractor.

Bolt board can be used either horizontally, vertically, at a 45 degree angle or in the Lift Station. Includes (30) various bolts and nuts in (5) different types and sizes. Includes (5) tools.Dimensions 17" deep x 28" wide x 18" high.

The PALM combines the ease and proprioceptive advantages of palpation with the objectivity and reliability of caliper and inclinometer measurements. • The caliper determines the distance in centimeters between the two palpating fingers. • The inclinometer determines the inclination in degrees between the two...

Stainless-steel pinwheel used to elicit sensory and pain perception responses.

Clear plastic models allow for 360° measurement. 12″ size. Goniometer displays in both inches and centimeters.

HeartWise Technology: Enables the blood pressure monitor to track the blood flow during inflation and block all noise during deflation. • AccuFit Extra Large Cuff (16.5″-23.6″) • Pressure Rating Indicator: Gives you the ability to quickly interpret your readings by color codes. • Irregular...

HeartWise Technology: Enables the blood pressure monitor to track the blood flow during inflation and block all noise during deflation. • Easy-Fit Cuff (9″-17″), One Size Fits Most • Pressure Rating Indicator: Gives you the agility to quickly interpret your readings by color codes....

Chrome-plated head with black rubber ring. Nylon handle with pointed tip can be used as a gross aesthesiometer.

This transparent plastic goniometer permits observation of a joint's axis of motion and its range of motion. The primary purpose of this device is to assist in physical therapy by determining range of motion of a joint as well as evaluating and gauging recovery...